Product details
This primer has been formulated to have outstanding adhesion and rust inhibition properties. Designed to have easy application qualities combined with excellent intercoat adhesion.
Typical use
Steel structures and bulk storage tanks.
Specifications
| Application | |
|---|---|
| Method | Brush or roll – use as supplied or thin sparingly with Mineral Spirits. To spray: Thin 10 – 15% with VM & P Naphtha. |
| Surface Preparation | Metal must be clean and free from oil and other contaminants. Rust must be removed using a wire brush or by a commercial grade sandblast. |
| Comments | Add no more than 12 fluid ounces of thinner per gallon of primer when conforming to 3.5 VOC maximum. When priming over sandblasted metal it is strongly suggested that 2 coats of primer be used to ensure a good service life. When spraying with this primer you may recoat 30 – 60 minutes after the primer has flashed off. |
| Thinning and Clean Up | Use Mineral Spirits or VM & P Naphtha. |
| Mixing | |
| Viscosity | 82 – 88 KU |
| Dry Time | |
| Drying Time at 70º | 2 – 3 hours to handle |
| Recoat | 24 hours |
| Gloss at 60º | 10 maximum |
| Regulatory | |
| V.O.C. | 3.12 lbs per gallon |
| Hazard Data | Flash point 100º F – Combustible Liquid. Lead and Chromium free. |
| Solids By Volume | 52% |
| Technical Data | |
| Weight Per Gallon | 11.5 lbs |
| Theoretical Coverage (No Loss) | 834 square feet per gallon at 1 mil dry |
| Practical Spreading | 333 square feet per gallon at 2 mils dry, (assumes approximately 20% loss) |
Related Products
