Product Details
Heavy-duty, protective coating used for high-wear floors, metal structures, and equipment metal products where durability, resistance to chemicals, fumes, and abrasion resistance is required.
Benefits
Hard and tough. Excellent adhesion. Gives “baked on” properties with room temperature cure. Urethanes are also noted for that wet look when cured.
Comments
Protect skin against splashes, etc. Wet paint may be removed with urethane thinner. Tape time “about” 6 hours. Pot life is limited, try to use within 2 hours after mixing for best appearance properties. Mix 3 parts pain with 1 part 89904 Catalyst. This coating should have 5 – 6 hours cure time at 70º F before being exposed to heavy fog or rain.
Specifications
| Application | |
|---|---|
| Method | Spray only. For airless: Use as supplied or thin up to 10%. For conventional: Thin 15–25%. Brushing is limited to small touch-up areas. |
| Surface Preparation | Metal should be clean and free from oil and grease. Rusted substrates should be wire brushed or commercially sandblasted and spot primed with the appropriate primer. |
| Thinning & Clean-Up | 3241 Urethane Thinner for normal application. |
| Mixing | |
| Viscosity | 25–40" #2 ZAHN (Self) |
| Dry Time | |
| Dry Time @ 70ºF | 3–6 hours to handle |
| Gloss @ 60º | High Gloss |
| Regulatory | |
| V.O.C. | 4.85 (Self) 4.82 (Mixed) |
| Solids By Volume | 37.45 ± (Self) 36.78± (Mixed) |
| Hazard Data | Flash Point 48º F. All "true" urethane coatings contain some free Isocyanate Monomer. Consult the SDS for breathing protection. |
| Technical Data | |
| Weight Per Gallon | 8.37±.2lbs (Self) |
| Theoretical Coverage (No Loss) | 601 square feet per gallon at 1 mil dry (Self) 589 square feet per gallon at 1 mil dry (Mixed) |
| Practical Spreading | 270 square feet per gallon at 2 mils dry (Self) assumes 10% loss 265 square feet per gallon at 2 mils dry (Mixed) assumes 10% loss |
Related Products
