Contact
ZolaPoxy - Image 1ZolaPoxy - Image 2ZolaPoxy - Image 3ZolaPoxy - Image 4ZolaPoxy - Image 5ZolaPoxy - Image 6ZolaPoxy - Image 7

Z Tone Industrial

ZolaPoxy

SKU: N/A
dashicons-color-picker Tintable
dashicons-star-filled Corrosion Protection
dashicons-shield-alt Mildew Resistence
Other fill quantities available
Contact a Rep.

Product Details

79 Series ZolaPoxy Primer-Sealer is a very fast dry, fast curing epoxy primer that has excellent corrosion resistance and adhesion.

 

Uses

This primer is designed for use over properly cleaned and sanded or etched aluminum, properly cleaned and sanded stainless steel, properly cleaned and sanded fiberglass/SMC, all other cured primers and paints, as well as automotive plastics (except polyethylene). ZolaPoxy Primer-Sealer can be top coated with all top coat finishes, including acrylic lacquer.

 

Benefits

  • May be top coated in 30-60 minutes
  • Good corrosion resistance in harsh environments
  • Good humidity resistance
  • Excellent color holdout
  • Superior adhesion to sanded bare steel, sanded fiberglass and etched or sanded aluminum
  • Tintable

 

Important Tips

When Z Tone 30 Series is sprayed on top of ZolaPoxy Primer-Sealer (after app. 30 minutes), the two products develop excellent inter-coat adhesion improving durability and moisture resistance. If spraying light colored Z Tone colors, allow a slightly longer dry time (45 minutes) on the ZolaPoxy Primer-Sealer. This will prevent yellowing of the light-colored Z Tone colors.

Specifications

Application
Method Mix 3 parts 79 series ZolaPoxy Primer-Sealer with 2 part 79 Series ZolaPoxy Primer/Catalyst. Spray
catalyzed primer at 40-50 psi air pressure. Apply 1-2 wet coats. Allow 10-15 minutes dry time between coats. Dry film should be .75-1.0 mil. Allow 30-60 minutes dry time before top coating. Thinner coats will reduce dry time before top coating. ZolaPoxy Primer can be top coated with all finish coatings.
Pot Life 2 hours @ 70ºF
Mixing
Mix ratio 3:1
Dry Time
Flash Time 10-15 minutes
Recoat W/O sanding 30-60 minutes. To sand 70ºF (21ºC), 50% RH 30 minutes.
Force dry 20 minutes @ 140ºF.
Infrared Dry 10-15 minutes @ 18-36 inches.
Regulatory
V.O.C. Mixed/Sprayable: 2.70 lbs. /gal. (324 g/I), limit 5.0, actual RTS V.O.C. 2.65, % solids RTU by weight 36%.
Safety Generally, this product is compliant with local Air Quality Management Districts. Users are ultimately responsible for determining applicable regulatory status. Consult with local regulatory agency for allowable usage conditions and disposal methods.