Product details
Formulated for metal fabricators and jobbers that require a very quick dry and wish to not apply a primer coat. This coating has very quick dry times combined with good exterior durability. Designed to give good adhesion to a variety of substrates including, hot or cold rolled steel plus a variety of plastics. Formulated with a Chromium free rust inhibitor for direct to metal applications.
Comments
When recoating this product be aware there is a lift stage. Recoat within 2 hours or after 20 hours. These time frames can change depending on film thickness and temperature. Suggest doing a test patch prior to recoating. This coating is formulated with a high performance rust inhibitor. To achieve the longest life, a primer and a top-coat will always perform better than a top coat alone.
Specifications
| Application | |
|---|---|
| Method | Formulated for spray application. May also be dipped. Compatible with conventional, airless, HVLP, VLP and air assisted airless spray equipment. |
| Surface Preparation | Metal should be free of oil, grease and foreign contaminants. Rusted areas should be wire brushed or commercially sandblasted. When painting over sandblasted metal, be sure to achieve 1 to 1.5 mils dry film thickness over the blast profile. In this situation a primer would be preferable. |
| Recommended Primer | 14011 Gray or White, 14022 Light Gray, 763 Gray, 14217 Red, 428 Black, 84101 Red. |
| Thinning & Clean-Up | Xylol, Tolul, VM&P Naphtha for fast dry times. To maintain a wet edge use D-100 or D-150. Low cost gun cleaning solvents for clean up only. |
| Mixing | |
| Viscosity | 50 to 60 seconds #4 FORD |
| Dry Time | |
| Dry Time @ 70ºF | 15 to 30 minutes to handle depending on temperature. |
| Gloss @ 60º | 80% minimum |
| Regulatory | |
| V.O.C. | 4.19 pounds per gallon, 502.8 grams per liter |
| Solids By Volume | 37.7% is typical |
| Hazard Data | Flammable liquid. Flash point approximately 65 to 70ºF. Ships as a Packing Group 2 material. This coating is free of Lead and Chromium compounds. |
| Technical Data | |
| Weight | 9.5lbs per gallon |
| Theoretical Coverage (No Loss) | 604 square feet per gallon at 1 mil dry (no loss) |
| Practical Spreading | 322 square feet per gallon at 1.5 mils dry (assume 20% loss) |
Related Products
