Product details
A high-quality rust resistant coating. This primer is designed for use where outstanding durability is required, along with the ability to be covered with multiple types of finish coats.
Benefits
This primer is noted for outstanding adhesion combined with good salt spray resistance.
Comments
Scuff sanding is recommended if primer has cured 4 or more days if applying finish coat.
Specifications
| Application | |
|---|---|
| Method | For conventional gun, use as packaged. For airless, use as packaged. For heated airless, use as packaged. Adjust temperature to 95 to 100 degrees F. Use a 14 or 16. |
| Surface Preparation | Metal should be clean and free from oil and grease. Best results on rusted substrates are obtained with wire brushing or commercial sand blast. |
| Thinning & Clean-Up | Xylene or Toluene. |
| Mixing | |
| Viscosity | 27 – 30 sec Zahn #2 Cup |
| Dry Time @ 70ºF | |
| Dust Free | 5 – 8 minutes |
| To handle | 10 – 15 minutes |
| Hard | 6 – 12 hours |
| Notes | Has no lift stage |
| Gloss @ 60º | Flat |
| Regulatory | |
| V.O.C. | 4.1 lbs per gallon |
| Solids By Volume | 41.82 average |
| Hazard Data | Flammable Liquid packing group 3 |
| Technical Data | |
| Weight Per Gallon | 12.46 lbs |
| Theoretical Coverage (No Loss) | 671 square feet per gallon a 1 mil dry (no loss) |
| Practical Spreading | 358 square feet per gallon at 1 1/2 mil dry (assumes 20% loss) |
Related Products
