Product Details
ZT-9251-000C-HP Quick Step Catalyst is specifically formulated to use with Z Tone 30 Series multicolor products to enhance water and chemical resistance without sacrificing adhesion or impact resistance.
Uses
Z Tone 30 Series with Quick Step Catalyst is designed for use over ferrous metals, nonferrous metals, fiberglass, plastics and woods. Use of appropriate surface preparation methods and primer(s) will be necessary. The use of this catalyst is optional, however highly recommended and is to be used only if higher performance of Z Tone 30 Series multicolor is desired.
Specifications
| Application | |
|---|---|
| Method | Over properly prepped and primed surface; select the proper primer/sealer base color for the Z Tone finish color. Use a pressure pot system with a conventional or HVLP spray gun with a fluid tip of .080 to .090 inch or 2.0 to 2.4 mm. Apply Z Tone in a two-step process. Sheer coat followed by Pattern Coat. |
| Sheer Coat | Spray gun 12 inches from surface with fluid needle valve nearly in the closed position. |
| Conventional Air Gun Pressure | 50–60 psi. |
| HVLP Gun Air Pressure | 40–50 psi. |
| Pot/Fluid Pressure | 10 psi (assumes 2 Liter pressure pot is used). |
Related Products
